Top posts
-
Vertical Cuttings Dryer System can treatment the OOC is lower than 5%
As is well-known, vertical cuttings dryer is the mostly used important equipment for drilling waste management. It is also called VERTI-G cuttings dryer. KOSUN vertical cuttings dryer has been proved with excellent performances during drilling waste disposal...
-
KOSUN Hi-G dryer treatment can dry-off the OOC drops to 15%-17%!
In near future,traditional cuttings dryer only applies to drying treatment of OBM(oil based mud )cuttings worldwide and cannot meet drying treatment requirements of WBM (water based mud )cuttings. Screen blockage occurs frequently, which results in service...
-
KOSUN LS584 Hi-G Dryer Shaker can be Used for Processing the Water-base Mud
With advanced KOSUN Hi-G Dryer shaker technology, the Hi-G dryer shaker is efficient in recovering more oil based drilling fluids and the Oil On Cuttings (OOC) figures is significantly reduced. Another benefit is the elimination of whole mud losses from...
-
KOSUN LS584-D Hi-g dryer was gotten high praise from customers both home and abroad
Hi-G dryer is popular used for water based mud drilling cuttings treatment. After Hi-G dryer, high speed centrifuge will be followed for further treating. After treated by centrifuge, solids parts can be used for construction; liquid part can be further...
-
Drilling Cuttings Waste Management Techniques have been Greatly Developed by KOSUN
Drilling cuttings waste management techniques have been greatly developed promoted by increasingly rising drilling activity and according environment protection requirement. But some processing technology has a certain range of applications and it is...
-
KOSUN Hi-G Dryer for Water-base Mud Treatment System
According to additional and additional strict demand for environmental protection in Chinese domestic rig drilling work website, voluminous drilling waste comes had been issued since last year. With years expertise of drilling waste treatment comes operation...
-
Drilling waste management (DWM) services provided by KOSUN
KOSUN will have more opportunities to make great contributions to the drilling waste management in China, with the establishment of “Xi’an Oil and Gas Drilling Waste Management Engineering Research Center”, The most attractive content in a DWM Solids...
-
Hi-G Dryer is Used to Recover the Mud from Drilling Cuttings
During the traditional drilling process, waste pit is built at the drilling site for drilling waste management. That is, drilling waste management system is discharged to the waste pit at ground level for next-stage treatment, or even directly buried....
-
Decanter Centrifuge with Explosion-proof Variable Frequency Control System
KOSUN oilfield drilling mud decanter centrifuge can meet with different requirements of mud treatment under various drilling conditions,that can do sedimentation and separation for particles more than 2 um. After treatment,the mud can achieve ideal viscosity...
-
KOSUN Drilling Fluid Decanting Centrifuge is Widely Used in Drilling Site
Drilling fluid decanting centrifuge is widely used for recovery barite to remove small solid particles, reduce the mud solid content, to ensure the performance of the drilling fluid. The drilling fluid decanting centrifuge is driven by two motors. The...
-
Vertical Cutting Dryer is able to Recycle both WBM and OBM
KOSUN vertical cutting dryer is able to recycle both water based mud and oil based mud, and oil content is between 3% and 5%. Dehydrate drilling cuttings are capable of meeting with environmental standard to bury or dispose. Flexible operational method...
-
Application of KOSUN Vertical Cuttings Dryer Used in Drilling Waste Management
Drilling waste management is to treat and recover the solid phase generated during drilling process to finally meet environment protection and discharge standards in countries and regions locally. It can meet the requirement of non-landing treatment of...
-
Composition and Structure of KOSUN LS584-D Hi-G shaker
Hi-G shaker may be a distinctive drying shaker for optimum thuslids removal and fluid recovery that is employed to recover cuttings from water-based or oil-based drilling fluids so on lower the hydraulic proportion than 100% and considerably scale back...
-
Benefits and Features of KOSUN Updated VC-2000 Vertical Cuttings Dryer
KOSUN vertical cuttings dryer telescopic skid is a platform for the operation of cuttings dryers. The platform can lower down while transportation and lift up while operation. The height of the total unit without removing the dryer is within the limit...
-
Features and Benefits of KOSUN Updating Vertical Centrifuge VC-2000
Traditional vertical centrifuge is only suitable for oil-base mud and synthetic-base mud drilling cuttings drying treatment but has weak performance for water-base mud drilling cuttings.Screen part is easy to be blocked with high frequency during water-base...
-
KOSUN VC-1000 series vertical centrifuges selected by the African customer
Along with the increasing requirements on environmental protection in the industry, all oilfields are nagged by drilling waste management. So, it is imperative for the oil and gas industry to solve the big problem. KOSUN VC-1000 series vertical centrifuges...
-
Causes of Drilling Fluid Lost in Drilling Fluid Shale Shaker Porcessing
Drilling mud could be a quite colloid composed of clay, water, oil and chemical mixture that is principally applied in oil or gas drilling plant. Several solids particles with its diameter blew two microns within the drilling fluid. Thus, drilling mud...
-
KOSUN Hi-G Dryer shaker is Popular Used for Water-based Mud in Drilling Waste Management
Drilling waste management aims to recover the solid phase which is generated during the drilling process, for the purpose of finally meeting environment protection and discharge standards. In such a way, it can achieve zero discharge of drilling mud,...
-
KOSUN High-speed Vertical Centrifuge can Apply for All the Drilling Fluids
DWM Solids control equipments of high-speed vertical centrifuge is saving the cost and the customer budget.An easy to use and maintain drilling mud solids control equipment were all the parts are accessible and can be cleaned and maintained.The safety...
-
VERTI-G Cuttings Dryer is Designed and Manufactured to Work Safely
The vertical cuttings dryer is designed and manufactured to work safely. This large high-speed rotating machine requires care and understanding for maximum safety. Unsafe practice in maintenance and operation will cause conditions, which are hazardous...
-
KOSUN Vertical Centrifuge can Processe the WBM Effective
In oil drilling industry, drilling waste management has been the useful measurement within drilling operators and local government both abroad and home. In particular, oil base oil is the most important focus on drilling waste management. The vertical...
-
KOSUN Drilling Waste Management Techniques Reduce the Environment Adverse Effect
A large amount of drilling waste will be generated at drilling site during drilling process. Such drilling waste is composed of many substances, which will inevitably cause severe pollution to the environment. In serious conditions, they will even harm...
-
Vertical Cuttings Dryer and the KOSUN Drilling Waste Treatment
Offshore drilling waste management is limited to drilling waste disposal, reinjection and transported to onshore management. Relatively speaking, onshore drilling waste management has multiple choices compared to offshore drilling waste management. Commonly,...
-
What's the advantages of Linear Motion Shale Shaker compared with other Shale Shaker?
In the role of oil drilling, the linear motion shale shaker as an indispensable part of its oil drilling operations for oil impact it is very large. For linear motion shale shaker screen, the use of linear motion shale shaker want better, then we need...
-
KOSUN can Customized Solids Control System Equipment
Oil drilling solids control system is the use of physical methods to remove the harmful solids phase in drilling fluid to improve the performance of drilling fluids and store the drilling fluid.The reasonable configuration and use of oil drilling solids...